Matters needing attention in excavator loading and unloading operation

The attention of the loading and unloading operation of the excavator is very important for the operator. On the one hand, it relates to the use of the car itself, and on the other hand, it relates to the safety of the driver. The following are the precautions for loading and unloading operations;

1. It is forbidden for the driver to leave the car when the bucket is suspended. The driver should put the bucket on the ground when leaving the excavator after finishing the operation.

2. It is forbidden to use buckets for excavating operations. Excavators are used for loading and short-distance transportation of bulk materials.

3. The equipment driving and lifting bucket can not be operated at the same time, the bucket shovel loaded goods can not exceed the limit of loading, not heavy loading of goods bucket.

4. Before taking the goods, should make the front and rear body form a straight line, alignment and close to the pile, at the same time make the bucket equal contact with the ground, and then take the goods, prohibit in the front and rear body Angle shovel loaded goods.

The operation can be carried out only when the water temperature and lubricating oil temperature of the engine reach the specified value. When the water temperature and oil temperature are too high or too low, the operation will damage the engine.